|
Product Details:
Payment & Shipping Terms:
|
| Condition: | New | Warranty: | 2 Years |
|---|---|---|---|
| Dimension: | As Customer's Request | Voltage: | 220V/380V/As Cuntomer's Request |
| Application: | Coal, Cement | Material: | Carbon Steel |
| Air Quantity: | 1.5-2.5m3/min | Thickness: | 4-6mm |
| Wind Pressure: | Wind Pressure: 4-4.5kpa | After-sales Service Provided: | Field Installation, Commissioning And Training |
| High Light: | hopper feeder conveyor,reciprocating plate feeder |
||
Simple Structure Low Power Consumption Inclined Cement Air Slide Conveyor
Product Description
The air slide conveyor can be used for cement, fly ash and other powdered materials that are easy to fluidize. The groove uses a high-pressure centrifugal fan as the power source to make the material in the closed conveying chute slowly flow to the inclined end while maintaining fluidization. The main part of the equipment has no transmission part, and adopts a new coated wheel breathable layer, which is convenient for sealing operation management, light in weight, low power consumption, large conveying force, and easy to change the conveying direction.
Main Parameters
| Model | XZ250 | XZ315 | XZ400 | XZ500 | XZ630 | XZ800 | |
| Tub length | Standard section(mm) | 2000 | |||||
| Non-Standard section(mm) | <2000 | ||||||
| Need air pressure(kpa) | 4-4.5 | ||||||
| Need air quantity(m3/min) | 1-4 | ||||||
|
Breath layer |
Material | Synthetic fiber | |||||
| Thickness(mm) | 4-6 | ||||||
| rating of temperature(°C) | 150 | ||||||
| Radial fracture strength(N/cm) | 4700 | ||||||
| Resistance(Pa) | 800-1200(under2 m3/ m2.min ) | ||||||
Working Principle
The air slide conveyor uses air flow to transport bulk materials along the pipeline. There are three types: suction, pressure and hybrid. Its working principle is to use the kinetic energy of the air flow to make the bulk material in a suspended state along the air flow along the pipeline:
Suction type: After the exhaust fan starts, the entire system assumes a certain degree of vacuum. The air flow causes the material to enter the suction nozzle under the effect of the pressure difference, and is sent to the separator at the discharge place along the conveying pipe. The material is separated from the air flow and then separated The bottom of the device is discharged, and the airflow is purified by the dust collector and then discharged into the atmosphere through the muffler. The advantage is that the feeding is simple, and the material can be sucked from several places at the same time. But the transportation distance is short and the productivity is low. High sealing requirements.
Press feed: The blower presses the air into the conveying pipe, the material is fed from the feeder, the mixture of air and material is pressed to the discharge place along the conveying pipe, the material is discharged through the separator, and the air is discharged into the atmosphere after being purified by the dust collector . The characteristics are opposite to the suction type, which can transport materials to several places at the same time. The transportation distance is longer, the productivity is higher, but the structure is complex.
Hybrid: It is a combination of the above two forms.
Main Features
1. High life, balanced running, simple and reasonable structure.
2. High efficiency, large throughput.
3. Sealing strong, convenient installation, combination quick.
4. Safe and reliable work, conveying distance can be arbitrary choice.
Details Show
Customer Case
Contact Person: admin
Tel: +8615936501341
