Payment & Shipping Terms:
|Product Name:||Belt Feeder||Reducer Type:||ZQ Type|
|Application:||Coal, Cement, Building, Mining, Power Plant, Etc.||After-sales Service Provided:||Field Installation, Commissioning And Training|
weight feeder conveyor,
conveyor belt weigh scales
ZQ Type Compact Weight Scale Conveyor / Conveyor Belt Scales In Power Plant
Belt coal feeder is powered by a motor cycloid reducer, which has a compact structure, smooth operation, and a wide speed range, which can realize stepless speed regulation; endless rubber belt transmission, the endless rubber belt is changed to the expansion wheel The adjustment of the tensioning device can adjust the tightness and deviation of the belt. Due to the use of the ring mechanism, the continuous coal feeding is different from the unidirectional coal feeding of the K-type reciprocating coal feeder. The 16Mn alloy cast chain link as the working surface improves the service life of the equipment and is connected with nylon rod pins. This structure has strong impact resistance. Large feeding range (0 ～ 500mm) This equipment is widely used for coal feeding at the raw coal end. Due to high production efficiency and stable working performance, the market share is very high.
Application of Vibration Feeder
Vibration Feeder is a kind of linear direction feeding machine.
It has features of smooth vibrating, reliable operation, long service life and suitable feeding.
It is widely used in mining, building, silicate and chemical industries for crushing and screening.
Characteristic of Vibration Feeder
* Small cubage, light weight, simple structure, easy installation, without movement assembly or lubrication.
* Less electrical energy consumption.
* This equipment can change, start or end material flow instantaneously.
* Feeding size adjustable during usage.
|Main Technical Parameters|
|Capacity TH||Speed RMinute|
The material in the silo enters the material guide trough through the connecting section and falls on the belt. When the belt is stationary, the material finally stops moving due to the internal friction, forming a static accumulation at a certain angle at the outlet; when the driving roller is in the driving device When it starts to rotate under the drive, the belt moves, and the belt drives the belt on it. The belt drives the material on the belt to the discharge port. The running belt turns back after the discharge port is unloaded. The discharge port is discharged to complete the feeding process; the sealing device provides sealing for the material leaking from the gap between the material guide groove and the tape; to change the feeding amount, the output shaft speed can be changed by adjusting the speed regulating handwheel of the reducer. The running speed of the belt can be achieved by adjusting the frequency of the inverter and changing the motor speed.
Contact Person: admin